TECHNICAL DATA

Printing structure thickness: 150 mm (5.9”)
Anilox cylinder: sleeve type
Plate cylinder: sleeve type
Useful printing width (max): 1250 mm (49,2”) – 1400 mm (55”)
Web width (max): 1300 mm (51”) – 1450 mm (57”)
Minimum print repeat: 440 mm. (17.3”)
Maximum standard print repeat: 1060 mm (41.7')
Maximum print repeat on request: 1100 mm (43,3”)
Printing repeats (without carrier): from 440 to 750
Printing repeats (with carrier): from 760 to 900 - from 910 to 1100
Longitudinal register: automatic, continuous
Horizontal register range: ± 7.5 mm (± 2.95')
Project mechanical speed: 450 mt/min - (1500 fpm)
Standard mechanical speed: 350 mt/min. (1000 fpm)
Gear pitch: infinite (gearless)
Winding reel diameter: 800 mm (31,5')
Unwinding reel diameter: 800 mm (31,5”)
Film tension: 0.15- 0.55 PLI (0.25- 1 N/cm)
Central drum diameter: 2225,7 mm (88”)
Central drum TIR: 0,010 mm (0.0004')
Anilox sleeve diameter: 185mm (7.28”)
Micrometric adjustments: by incremental regulation keyboard
Intermedium Carrier: Pneumatic Type
Deck racking screws: high precision ball bearing type
Racking screws diameter: 32 mm (1,26”)
Locking and sliding of the decks by high precision linear guides
Pressure release: horizontal and sequential by stepping motor
Type of motorization: Vector a/c motors